| Patterned
after the Norwood winch, but without the rotating
winch mounting post, this winch is designed to be operated down low for
rolling logs onto the mill bed, and then used with a "V" idler on a
vertical post for rolling cants. (pictures of the cant rolling post to follow) |
 |
 |
 |
 |
 |
 |
 |
 |
| This is a
straight-on view of a log approximately 26" to 28" diameter being
rolled up onto the sawmill bed. The log is about 9' long and weighs about 1000lbs |
 |
| The same
log, but at a slightly different angle and showing a bit of the winch
framework |
 |